Inquiry 0 products

    Hello, visitor!

    Thank you for your selection! Please fill the fields and send the request so we can contact you.

    Merle Aruoja

    Tiptiptap OÜ

    Services

    ×

    Installation

    Contact us

    Mänguväljakute paigaldamine

    Installation services are normally a part of cooperation with our customers. If you order a playground, skatepark or other facility from us, we shall provide you with a high-quality product and ensure proper installation. The exact dimensions of the required safety underlay are provided to the customer already in the product selection process and our sales agents assist you in planning the necessary preparatory work. Once the production is completed, we shall install the items at their proper locations in accordance with all the requirements. Installation work comes with a 3-year warranty period.

    The customer can choose not to order installation and put the playground or other product in place himself. In this case, installation is not subject to our warranty.

    ×

    Contact form

    Installation

    Installation services are normally a part of cooperation with our customers. If you order a playground, skatepark or other facility from us, we shall provide you with a high-quality product and ensure proper installation.

    ×

    Inspection

    Contact us

    The technical condition of playgrounds is assessed on the basis of safety standard EN 1176:2008. Our inspection service helps determining the condition of the existing playground and its equipment. We establish whether there are any dangerous equipment or nonconformities with the safety standard and what action should be taken to make the playground safe and integral.

    The work is carried out in two stages. First, we collect data: visit to the playground, verification of conformity to the standard using test pieces, photographing (photos of the entire playground and of each structure individually), measurement of sand areas, recording of deficiencies, measurement and inspection of safety underlays. Second, we process the data: consolidation and analysis of data, evaluation of the technical condition and safety of playground equipment.

    The inspection deliverables include thorough photo material of each playground item inspected and a summary table comprising the following particulars: a rating of the overall condition (very good, good, satisfactory, poor, very poor); an assessment of play safety according to standard EN 1176:2008 (dangerous, potentially dangerous, safe); a list of deficiencies / necessary work tasks; recommendations for further action; elimination of listed deficiencies and the planned schedule for maintenance service.

    Safety matters! Do not hesitate to contact us and request a quote.

     

    ×

    Contact form

    Inspection

    Our inspection service helps determining the condition of the existing playground and its equipment.

    ×

    Maintenance service

    Contact us

    Regular maintenance helps prevent damage to the playground structures and, consequently, accidents. We provide professional high-quality maintenance service for playgrounds. Our strengths:

    • experience with technical maintenance of playgrounds (maintenance of 200 public playgrounds in Tallinn)
    • specialists who have completed a training course of safety standard EN 1176:2008
    • professional maintenance team
    • maintenance vehicles with the necessary equipment
    • long-term experience with manufacturing playgrounds (we have the necessary production premises and equipment - this allows us reacting quickly, i.e. we can manufacture new components to replace missing and broken ones and carry out repair work)

    The maintenance service consists of the following stages:

    • Elimination of threats (either entire playground or dangerous equipment) pursuant to safety standard EN 1176:2008. Removal of dangerous elements (removal of elements which pose a threat to the health of users or have become so obsolete that it is not reasonable to restore them). Replacement of damaged components (components the lack of which poses an immediate threat to the user’s health, e.g. missing guardrails, damaged slide channel, etc).
    • Reconditioning and repair. Replacement of components (damaged, missing or worn components, e.g. slide channel, step, handrail, suspended swing).  Addition of fixings and components. Addition of plywood panels on the corners of sandboxes which make corners safer and add functionality. Tightening of loose fixings, tightening and replacement of screws/bolts. If requested, installation of new playground equipment to make the playground more complete and provide important activities for children, e.g. swinging, sliding, climbing, etc. Repair and installation of fences.
    • Regular maintenance according to intensity of use and the nature of equipment monthly routines (inspection of the condition of components and assemblies, prevention of potentially dangerous situations, elimination of existing hazards, reconditioning of safety underlays of sand, elimination of damage caused by vandalism, responding to calls). Annually: replacement of sand, painting, thorough inspection of structural elements (ensures a fresh look and safety of the playground for years to come).

    Scheduled maintenance of structures should be carried out depending on their intensity of use. Structures subject to a warranty period also need regular scheduled maintenance. For the provision of services, we sign a maintenance agreement with the client setting out the detailed conditions of carrying out maintenance. Do not hesitate to contact us and request a quote.

    ×

    Contact form

    Maintenance service

    We provide professional high-quality maintenance service for playgrounds.

    ×

    Renovation

    Contact us

    Kose skatepark enne renoveerimist

    It is essential that the playgrounds and skateparks which are in use would be meet all the applicable quality and safety standards. We are your partners also when you need to renovate an existing playground or skatepark. Our team has the corresponding experience and our renovation work comes with a warranty period. Ask for a quote!

    An example, how we renovated Kose Skatepark

    Ask for a quote!

     

    ×

    Contact form

    Renovation

    Kose skatepark enne renoveerimist

    It is essential that the playgrounds and skateparks which are in use would be meet all the applicable quality and safety standards. We are your partners also when you need to renovate an existing playground or skatepark. Our team has the corresponding experience and our renovation work comes with a warranty period. Ask for a quote!

    ×

    Tube bending

    Contact us

    We provide tube bending services using the profile bending machine MG AR60 and tube bending machine Gilber Bieger S50. We manufacture handrails, guardrails, ladders and various climbing structures for children using tubes with a diameter of 25, 33 or 40 mm.

    Feel free to contact us for further information and request a quote!

    ×

    Contact form

    Tube bending

    We provide tube bending services using the profile bending machine MG AR60 and tube bending machine Gilber Bieger S50. We manufacture handrails, guardrails, ladders and various climbing structures for children using tubes with a diameter of 25, 33 or 40 mm.

    Feel free to contact us for further information and request a quote!

    ×

    Metalworks

    Contact us

    We manufacture steel structures of various complexity and with a maximum weight of 250kg, and provide Mig/Mag welding services using the welding machine ESAB 4004i Pulse. For structures, we use only sheet metal components which have been laser cut. Our equipment includes the band-saw MEBAswing 230DG and a vertical milling machine.

    Feel free to contact us for further information and request a quote!

    ×

    Contact form

    Metalworks

    We manufacture steel structures of various complexity and with a maximum weight of 250kg, and provide Mig/Mag welding services using the welding machine ESAB 4004i Pulse. For structures, we use only sheet metal components which have been laser cut. Our equipment includes the band-saw MEBAswing 230DG and a vertical milling machine.

    ×

    Wood processing

    Contact us

    For wood processing, we use the sliding table saw NZ3200 from the Belgian company ROBLAND. Main characteristics: carriage stroke: 3200mm; tilt angle of motorised cutting blade: up to 45 degrees; fine adjustment of longitudinal limiter.

    For provide wood processing services - please contact us for further information and ask for a quote!

    ×

    Contact form

    Wood processing

    For wood processing, we use the sliding table saw NZ3200 from the Belgian company ROBLAND. Main characteristics: carriage stroke: 3200mm; tilt angle of motorised cutting blade: up to 45 degrees; fine adjustment of longitudinal limiter.

    For provide wood processing services - please contact us for further information and ask for a quote!

    ×

    Automated colour coating

    Contact us

    For painting wooden elements and plywood surfaces, we use a FALCON high-pressure spray pump, and for painting wooden profiles from up to three sides, we use an automated colour coating & spray machine from the Danish company Leif & Lorentz.

    Do not hesitate to contact us for a quote!

    ×

    Contact form

    Automated colour coating

    For painting wooden elements and plywood surfaces, we use a FALCON high-pressure spray pump, and for painting wooden profiles from up to three sides, we use an automated colour coating & spray machine from the Danish company Leif & Lorentz.

    Do not hesitate to contact us for a quote!

    ×

    CNC

    Contact us

    For cutting and nesting of sheet material, we use the CNC processing centre Vantage 24M from the German company Weeke. The size of the matrix table is 3100x1550mm, and the centre has an 8-slot clip for automated exchange of cutting tools. The maximum thickness of the processed component is 100 mm. The following sheet materials can be processed: plywood, MDF, HDF, chipboard, HDPE plastic, Corian, HPL and wood.

     

    Do not hesitate to contact us for a quote!

     

    ×

    Contact form

    CNC

    For cutting and nesting of sheet material, we use the CNC processing centre Vantage 24M from the German company Weeke. The size of the matrix table is 3100x1550mm, and the centre has an 8-slot clip for automated exchange of cutting tools. The maximum thickness of the processed component is 100 mm. The following sheet materials can be processed: plywood, MDF, HDF, chipboard, HDPE plastic, Corian, HPL and wood.